User Manual Q&AAnswer
Mar 03, 2025 - 11:14 PM
To pair the Bluetooth speaker on the REPLAY HB661-1 Bolt Electric Self Balancing Hoverboard, please follow these steps:
1. Turn on the hoverboard and wait for the indication tone that indicates the speaker is in pairing mode.
2. Make sure your Bluetooth device is within 3 feet of the hoverboard.
3. Activate the Bluetooth function on your device and search for available Bluetooth devices.
4. From the list of available devices, select "BOLT" to pair with the hoverboard.
5. If prompted, enter the password '0000' to confirm and finalize the pairing.
6. Once paired successfully, you will hear an indication tone, and you can start using the device.
7. After the initial pairing, the speaker will automatically pair with your device whenever its Bluetooth is activated and in range.
Please note that if the pairing is unsuccessful, you can turn off the hoverboard and repeat the above steps to try again. If you encounter any issues, refer to the instruction manual or contact REPLAY customer support for further assistance.
Add New Comment