User Manual Q&AAnswer
Mar 03, 2025 - 11:13 PM
To change the DPI settings on the CORSAIR Ironclaw RGB FPS-MOBA Gaming Mouse, you can use the DPI Cycle button (E) located on the mouse. Each press of the button will cycle through different DPI stages. The multi-purpose LED indicator (H) on the left side of the mouse will indicate the current DPI stage.
Here's how to change the DPI settings:
1. Make sure your computer is turned on.
2. Connect the CORSAIR Ironclaw RGB mouse to an available USB 2.0 or USB 3.0 port on your computer.
3. Download and install the iCUE software from the Corsair website (www.corsair.com/downloads).
4. Once the software is installed, run it and follow the instructions for setup.
5. In the iCUE software, locate the DPI settings section.
6. Customize the DPI stages according to your preference. You can set different DPI values for each stage.
7. Save the changes and exit the iCUE software.
Now, you can use the DPI Cycle button (E) on the mouse to switch between the different DPI stages you have set. The multi-purpose LED indicator (H) will show the corresponding color for each DPI stage.
Refer to the user guide for more detailed instructions and additional features of the CORSAIR Ironclaw RGB FPS-MOBA Gaming Mouse.
Add New Comment