Answer

Mar 03, 2025 - 10:25 PM
To properly install the Euri Lighting ECS-150W1050 LED Square Canopy Light, please follow the instructions provided in the installation guide. Here is a step-by-step guide:
1. Before starting the installation, make sure to turn off the power to avoid electrical shock or injury.
2. Ensure that you have professional electric knowledge or consult a professional electrician for assistance.
3. Check the packaging for any shipping damage. If there is any damage, contact the manufacturer immediately.
4. Review the wiring diagram provided in the manual to understand the electrical connections.
5. There are three installation options mentioned in the manual. Choose the one that suits your installation requirements:
- Installation (1): Fix one side of the accessory safety rope on the back of the fixture. Use an electric drill to set fixed holes through the ceiling. Fix the other side of the safety rope on the ceiling. Connect the wire of the fixture to the main power source according to the local electrical connection code. Ensure the wire joints are well protected. Finally, fix the fixture on the ceiling with the accessory screws.
- Installation (2): Connect the wiring to the local power supply in the 3/4”NPT Stem. xxxx the fixture to the 3/4”NPT Stem.
- Installation (3-1): Fix the mounting bracket on the back of the fixture with the supplied screws. Unscrew the nut from the customer-supplied 3/4”NPT stem, make the stem hole on the mounting bracket through the 3/4”NPT stem, then xxxx the nut back to 3/4”NPT and fix it. Make the wiring connections as per the "Electrical Connections" section and ensure the wires are well protected.
- Installation (3-2): Drill alignment holes on the top ceiling to match the holes on the mounting bracket. Insert the supplied rubbers into the alignment holes, then fix the mounting plate on the ceiling with the supplied screws. Mount the fixture on the mounting plate with the supplied screws. Make the wiring connections as per the "Electrical Connections" section and ensure the wires are well protected.
6. After completing the installation, double-check all connections and ensure proper grounding for safety.
Please note that these instructions are a summary of the installation guide provided by Euri Lighting. For more detailed information and illustrations, refer to the official installation guide for the Euri Lighting ECS-150W1050 LED Square Canopy Light.
Add New Comment