User Manual Q&AAnswer
Mar 03, 2025 - 10:17 PM
To install the SIRHC LABS Transbrake Bump Driver, please follow these steps:
1. Ensure that the Cortex EBC is compatible with the Transbrake Bump Driver as it is specifically designed for use with the Cortex EBC.
2. Identify the control input wire (purple wire) on the Transbrake Bump Driver.
3. Connect the control input wire to the control device's ground. This will activate the Transbrake Bump Driver.
4. If using a one-wire solenoid, refer to the provided one-wire solenoid wiring diagram to properly connect the solenoid to the Transbrake Bump Driver.
5. If using a two-wire solenoid, refer to the provided two-wire solenoid wiring diagram to properly connect the solenoid to the Transbrake Bump Driver.
6. Ensure that the solenoid being used draws 20 Amps or less, as the Transbrake Bump Driver is designed for solenoids within this current range.
7. If desired, the Transbrake Bump Driver includes a 12 V Diffused Indication LED (Red, Green, Blue) for visual indication.
Please refer to the SIRHC LABS Transbrake Bump Driver Instruction Manual for more detailed installation instructions and diagrams.
Add New Comment