User Manual Q&AAnswer
Mar 03, 2025 - 10:08 PM
To mount the HFCL ion4-W Access Point on a pole, follow these steps:
1. Open the hose clamp by turning the screws counter clockwise.
2. Straighten out the end of the hose clamp.
3. Slide the hose clamp through the back of the ion4-W Access Point.
4. Wrap the hose clamp around the pole.
5. Tighten the strap by turning the screws clockwise.
Please note that HFCL is not held liable for any damages incurred during the mounting process. For more detailed instructions and illustrations, please refer to the "Mounting of ion4_w Access Point" section in the user guide provided.
Add New Comment