User Manual Q&AAnswer
Mar 03, 2025 - 10:00 PM
Installation and operation of the CONDUCTIX wampfler W5-traxX Media Supply System are outlined in the provided manual. Here is a step-by-step guide:
1. Before installation, ensure that the system is suitable for your intended use and operating conditions, as specified in the manual.
2. During transport and assembly, securely fasten components and larger assembly groups to hoist units and load-carrying equipment with sufficient load capacity.
3. When connecting the system, connections should only be finished by specially skilled staff. Install a safety valve for the feeding system of compressed air to inhibit system overpressure.
4. Prior to commissioning, visually inspect the entire installation and its components. Check safety-relevant parts and equipment, and conduct a pressure test under real operating conditions with the help of an expert.
5. During daily commissioning, perform visual controls and compulsory tests. Only operate the system with functional protection and safety devices. Notify the responsible person immediately of any damaged parts.
6. For cleaning, maintenance, repair, and servicing, cordon off the maintenance and repair area. Switch off electric and pneumatic supply and secure the system against unexpected switch-on. Deaerate the pneumatic components completely.
7. Observe the maintenance and inspection intervals specified in the maintenance instructions. Replace components and seals that are no longer usable. Cleaned, wiped-off, or removed lubricated or greased spots must be relubricated as prescribed.
Please refer to the provided manual for more detailed instructions, including safety precautions and specific technical information.
For any further questions or concerns, you can contact Conductix-Wampfler directly at the provided contact information.
Add New Comment