Answer

Mar 03, 2025 - 09:44 PM
The PR-45552-HPHNM Pressure Injectable Arrowg+ard Blue Advance Two-Lumen PICC with 80 cm Hydrophilic-Coated Nitinol Guidewire is a medical device used for intravenous access. Here is a step-by-step guide on how to properly insert and use the product:
1. Preparation: Ensure that you have read and understood all the warnings, precautions, and instructions provided in the instruction manual. Gather all the necessary components mentioned in the contents list.
2. Patient Preparation: Follow standard aseptic technique to prepare the patient's skin at the insertion site. Use the provided skin protectant prep.
3. Catheter Insertion: Insert the introducer needle into the intended insertion vessel. Advance the needle until blood return is observed. Remove the needle and insert the dilator-sheath assembly over the wire guide. Remove the dilator-sheath assembly, leaving the wire guide in place.
4. Wire Guide Insertion: Insert the nitinol wire guide through the sheath and advance it until the desired position is reached. Remove the sheath over the wire guide.
5. Catheter Insertion: Insert the catheter over the wire guide until the desired position is reached. Ensure that the catheter is properly secured to the skin using the provided STATLOCK Catheter Stabilization Device.
6. Wire Guide Removal: Gently withdraw the wire guide while holding the catheter in place.
7. Flushing and Connection: Flush the catheter lumens with a saline solution using the provided syringe. Connect the desired infusion or injection devices to the catheter lumens.
8. Catheter Maintenance: Follow the recommended maintenance and care procedures outlined in the patient information booklet.
It is important to note that this is a general overview of the insertion and usage process. For detailed and specific instructions, please refer to the PR-45552-HPHNM Pressure Injectable Arrowg+ard Blue Advance Two-Lumen PICC with 80 cm Hydrophilic-Coated Nitinol Guidewire Instruction Manual provided with the product.
Add New Comment