User Manual Q&AAnswer
Mar 03, 2025 - 09:41 PM
To clean the dust tank of the Jap BIONIC BLAST Torando S1, follow these steps:
1. Press the dust tank release button to remove the whole dust tank from the appliance.
2. Take out the filters and the plastic protector and empty the contents of the dust tank.
3. The filter can be shaken clean or cleaned and rinsed with warm water (no detergents). Make sure all the parts are completely dry before reinstalling them.
4. Wash and rinse the tank if necessary.
5. Place the tank back into its position. You will hear a click, indicating that it is properly fixed.
Note: Ensure that all the parts are dry before placing them back in their position. Place the filter in the dust tank. Assemble the dust tank in the motor unit following the opposite procedures as for detaching the dust tank.
Please refer to the instruction manual for visual references and additional information on cleaning and maintaining the Jap BIONIC BLAST Torando S1.
Add New Comment