How do I assemble the LUMBER JACK Mitre Saw with Stand MSS200? (LUMBER JACK Mitre Saw Stand MSS200 User Guide)

Answer

manuals.plus

Mar 03, 2025 - 09:22 PM


To assemble the LUMBER JACK Mitre Saw with Stand MSS200, please follow the instructions provided in the user manual. Here is a step-by-step guide:

1. Support Roller Assembly:
- Insert the roller arm into the attachment and secure it in place with  xxxx  (C).
- Repeat this step for the other roller arm.
- Insert the roller assembly onto the main frame rail and secure it with  xxxx  (C) on both sides.
- Attach the carrying handle (L) using 2 x bolt (D), 2 x split ring (F), 2 x washer (H), and 2 x nut (E).
- Attach the wheels (K) onto the axle (I) using a locking washer (CJ).
- Secure the wheels and axle to the main frame using 2 x bolt (D), 2 x split ring (F), 2 x washer (H), and 2 x nut (E).

2. Unfolding the Legs:
- Flip the stand onto its back.
- Unlock each leg one by one using the lever (Al) and pull them out fully.

3. Installing the Saw to the Stand:
- With the stand unfolded and upright, attach the miter saw to the saw brackets on each side of the saw using bolts (O), split rings (F), washers (H), and nuts (E).
- Then, attach the saw to the stand following the instructions provided in figures 3 to 6.

4. Leveling the Stand:
- The legs of the stand have multiple levels that can be set. Choose the desired level before installing the saw on the stand. Refer to figures 7 and 8 for guidance.

5. Offset Mounting Bracket for Mitre Saws:
- Secure the offset mounting brackets as shown in the manual.
- These brackets can be adjusted to match various offset hole patterns.

Before transporting the saw, ensure that all parts and moving parts are securely clamped in place.

For more detailed instructions and illustrations, please refer to the LUMBER JACK Mitre Saw with Stand MSS200 User Guide provided with your purchase.