Answer

Mar 03, 2025 - 09:15 PM
To properly insert and use the Pressure Injectable Arrowg+ard Blue Advance One-Lumen PICC Antimicrobial catheter, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Before starting the procedure, ensure that you have read and understood all the warnings, precautions, and instructions in the instruction manual.
2. Prepare the patient by cleaning and disinfecting the insertion site according to standard protocols.
3. Open the package and inspect the contents to ensure everything is present and in good condition.
4. Use the GlideThru Peel-Away Sheath to create a peel-away access site. Insert the sheath over the dilator, and advance it into the vessel.
5. Remove the dilator and insert the Spring-Wire Guide through the sheath into the vessel. Confirm proper placement using appropriate imaging techniques.
6. Remove the sheath and advance the catheter over the wire guide into the vessel. Ensure the catheter is fully inserted and positioned correctly.
7. Remove the wire guide and secure the catheter in place using the SecondSite Adjustable Hub Catheter Clamp and Fastener.
8. Connect the syringe to the catheter hub and perform a blood aspiration to confirm proper placement.
9. Flush the catheter with an appropriate solution according to healthcare facility protocols.
10. Apply the provided dressing, such as the STATLOCK Catheter Stabilization Device, to secure the catheter and prevent accidental dislodgement.
11. Provide the patient with the Patient ID Card, Chart Sticker, and Patient Information Booklet for reference and documentation.
It is important to note that this answer is a general overview and should not replace the detailed instructions provided in the instruction manual. Always consult the manual for specific guidelines and recommendations for the Pressure Injectable Arrowg+ard Blue Advance One-Lumen PICC Antimicrobial catheter.
Add New Comment