User Manual Q&AAnswer
Mar 03, 2025 - 08:30 PM
To install the SESSAK LIGHTING K49818-1 Morgan Pendant Light, please follow the instructions below:
1. Before starting the installation, make sure to disconnect the electrical power supply.
2. Read the entire instruction manual carefully before proceeding with the installation.
3. Ensure that the electrical cord of the luminaire is not damaged. If it is damaged, the luminaire must be discarded.
4. Check for symbols on the luminaire and their meanings. Some common symbols include:
- Class I: The luminaire must be connected to protective earth.
- Class II: The luminaire is double-insulated and should not be connected to protective earth.
- The product conforms to health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
- The protective earth cable (usually yellow-green) is connected to the terminal identified by this symbol.
- The phase (live) cable (usually brown) is connected to the terminal identified by this symbol (L).
- The neutral cable (usually blue) is connected to the cable identified by this symbol (N).
- The luminaire has a minimum distance requirement in meters for the area to be illuminated. Take into account doors, windows, etc., that could come within this distance when opened.
- Ingress Protection class 21 (protection against dripping water).
- Ingress Protection class 44 (protection against splashing water).
- The maximum allowed power of the bulb(s) in Watts.
- The luminaire is for indoor use only.
- The luminaire should not be thrown away with household waste. It should be taken to a recycling station for proper disposal.
5. Follow the specific installation steps provided in the instruction manual for the SESSAK LIGHTING K49818-1 Morgan Pendant Light.
Please note that these are general installation guidelines. For detailed and specific instructions, refer to the instruction manual provided by SESSAK LIGHTING.
Add New Comment