User Manual Q&AAnswer
Mar 03, 2025 - 08:14 PM
To replace the battery in your Bose SoundLink Color, please follow the steps outlined in the instruction manual provided by iFixit (Guide ID: 62837). Here is a complete step-by-step guide:
1. Gather the necessary tools: You will need a metal spudger, a tamper-resistant TORX Plus TR bit (TORX PLUS IPR 10.99), a Phillips #0 screwdriver, a Pro Tech Toolkit, and a soldering workstation.
2. Remove the outer casing: Carefully pry up the four round, plastic plugs located on the outer casing using a metal spudger. Then, remove the four 1.8 cm-long T15 Torx Security screws.
3. Open up the casing: Carefully open up the casing, keeping in mind that the top button pad may need to be re-glued upon installing the new casing.
4. Remove the battery: Using a pair of tweezers, carefully remove the battery from the inner assembly. Lift the inner assembly from the outer casing.
5. Cut the battery cover: Partially cut the battery cover on the side, being careful not to damage the circuit or the battery. Cut the cover just enough to remove it, as it will be reused.
6. Desolder the battery leads: Use a soldering workstation to desolder the battery leads from the PCB and remove the old battery.
7. Install the new battery: Choose a replacement battery, such as the Panasonic NCR18650B with solder tabs. Fit the new battery into place, cut the leads to the needed length, and pay attention to polarity. You may need to enlarge the leads holes in the plastic case with a cutter to accommodate standard battery leads.
8. Reassemble the device: Put back the sponge cover to avoid vibrations and keep the battery firmly in place. Reassemble the device by following the instructions in reverse order.
Please note that this answer is based on the information provided in the iFixit instruction manual for the Bose SoundLink Color Battery Replacement (Guide ID: 62837). It is always recommended to refer to the manual for the most accurate and up-to-date instructions.
Add New Comment