User Manual Q&AAnswer
Mar 03, 2025 - 08:10 PM
To power up the NETGEAR WAX638E Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point, you have two options. You can either connect it to a PoE++ switch or use a separately purchased power adapter.
If you choose to connect it to a PoE++ switch, you need to connect the LAN 1/PoE++ port on the access point to a PoE++ switch that supplies 802.3bt power (60W PoE++ per port).
If you prefer to use a power adapter, simply connect the LAN 1/PoE++ port on the access point to a router or other network device on a network with Internet connectivity using an Ethernet cable.
Please note that the access point requires Internet connectivity for proper setup and operation.
Add New Comment