User Manual Q&AAnswer
Mar 03, 2025 - 07:54 PM
To install the Telbix ONETA WB1 wall light fixture, please follow the steps below:
1. Ensure that the power supply is turned off before starting the installation process.
2. As stated in the manual, it is important to have the fixture installed by a qualified electrical contractor to ensure proper installation and safety.
3. Gather the necessary tools for the installation. Please note that the tools are not included with the product.
4. Remove the shade ring that is attached to the lamp holder.
5. Insert the appropriate G9 globe (not included) into the lamp holder. Make sure the wattage of the globe does not exceed 6W.
6. Mount the fixture on the desired location on the wall, ensuring it is securely attached.
7. Connect the electrical wires of the fixture to the appropriate electrical connections in accordance with AS/NZ3000 electrical standards. It is recommended to consult a qualified electrician for this step if you are not familiar with electrical installations.
8. Once the wiring is properly connected, secure the fixture in place using the provided screws or mounting brackets.
9. Double-check all connections to ensure they are secure and properly insulated.
10. Finally, turn on the power supply and test the fixture to ensure it is functioning correctly.
Please note that this answer is a general guide based on the information provided in the manual. For specific installation instructions and safety guidelines, it is always recommended to refer to the official Telbix ONETA WB1 Installation Guide or consult a qualified electrician.
Add New Comment