How do I assemble the Schuller 364201D Lighting Pendant? (Schuller 364201D Lighting Pendant Instruction Manual)

Answer

manuals.plus

Mar 03, 2025 - 07:48 PM


To assemble the Schuller 364201D Lighting Pendant, please follow these instructions:



1. Start by unpacking all the components and lay them out on a clean, flat surface.

2. Identify the main body of the pendant, which is usually a metal or glass structure.

3. Attach the included special screws to the designated  xxxx  holes on the pendant. It is important to use these special screws provided by Schuller for proper installation.

4. Once the screws are securely fastened, make sure the pendant is stable and properly aligned.

5. Next, locate the integrated LED module. This module is responsible for providing the lighting for the pendant.

6. Connect the integrated LED module to the pendant's wiring system according to the manufacturer's instructions. This may involve connecting wires or plugging in connectors.

7. Ensure that all connections are secure and properly insulated to prevent any electrical hazards.

8. Finally, test the pendant by turning on the power supply. If the pendant has a remote control, make sure to follow the instructions for selecting the correct channel (usually channel 1) on both the receiver installed in the product and the remote control.



Please note that these are general assembly instructions, and it is always recommended to refer to the specific instruction manual provided by Schuller for the exact steps and any additional information or precautions.