User Manual Q&AAnswer
Mar 03, 2025 - 07:38 PM
1. Gather the necessary tools: You will need a screwdriver for the installation process.
2. Complete electrical connection: Before installing the luminaire, make sure the electrical connection is complete. This involves connecting the necessary wires according to your electrical setup.
3. Push luminaire inside ceiling grid: Once the electrical connection is complete, push the luminaire inside the ceiling grid. Ensure that the driver side of the luminaire is facing up.
4. For PSU series: If you have the PSU series, no further steps are required. The luminaire is ready for operation.
5. For PSD series: If you have the PSD series, do not open any screws. The luminaire is ready for operation.
Important Note: It is crucial not to cover the luminaire with any insulating material. This can harm the system and should be avoided at all times.
Please refer to the PHILIPS Recessed Full Glow Light RC380 G6 Installation Guide for more detailed instructions and illustrations.
Add New Comment