User Manual Q&AAnswer
Mar 03, 2025 - 07:22 PM
To install the Martec Avoca DC Series ceiling fan, please follow the steps outlined in the installation guide provided. Here is a summary of the installation process:
1. Align the bracket and xxxx the hanger bracket to the ceiling tightly.
2. Wire the fan to the mains as illustrated. It is important to have a qualified and licensed electrician carry out the installation.
3. Attach the blades to the top of the motor using the provided screws. Make sure to tighten the screws for each blade.
4. Place the fan into the hanger bracket and align the ball joint slot with the hanger bracket.
5. After wiring is completed, attach the canopy to the hanger bracket by pushing upwards and twisting anti-clockwise. Ensure the canopy is not touching the ball joint.
6. If you have the fan and LED light model, follow the instructions to install the LED light kits.
7. If you have the remote control model, wire up the receiver with quick connectors and insert it into the mounting bracket. Ensure the antenna wire is folded safely inside the canopy cover before final assembly.
8. For WiFi/remote control pairing, follow the instructions provided in the manual for both fan-only and fan LED light models.
Please note that it is important to read the complete installation guide provided with the product for detailed instructions and safety precautions. If you have any further questions or concerns, you can contact Martec Australia through their provided contacts.
Add New Comment