Answer

Mar 03, 2025 - 07:20 PM
To charge the Hama 00 201668 Power Pack, follow these steps:
1. Start the charging process by connecting the USB-A to USB-C cable (included in the package) to the USB-C input on the power pack (IN 5V/2A).
2. Connect the other end of the cable to a suitable USB charger. Make sure to use a charging device or USB connection that is in good working condition.
3. Refer to the operating instructions of your USB charger for specific guidance on how to connect and charge the power pack.
4. The charging process will begin automatically and the capacity will be displayed constantly during the charging process.
5. The power pack has four status LEDs that indicate the charging progress. Each LED represents 25% of the capacity. When all four LEDs are lit up, the power pack is fully charged.
6. It is recommended to fully charge the power pack at least once before using it for the first time.
7. To check the current capacity of the power pack, press the button on the power pack. Press the button twice until the status LEDs go out to switch off the power pack.
Note: Do not charge the power pack via your PC or notebook as the charging currents can damage the USB port. Also, avoid overcharging the power pack or allowing the battery to completely discharge. Charge the power pack regularly (at least quarterly) during periods of prolonged storage.
Add New Comment