User Manual Q&AAnswer
Mar 03, 2025 - 07:13 PM
To connect the VigilLink VLSP-18HT150 1x8 HDMI 2.0 Splitter Over HDBaseT 150m 18Gbps, follow these steps:
1. Connect your HDMI source device (such as a DVD player or set-top box) to the HDMI input port on the transmitter using an HDMI cable.
2. Connect the HDMI loop output port on the transmitter to an HDMI display device (such as a TV or monitor) using an HDMI cable.
3. Connect the HDBaseT output ports (1-8) on the transmitter to the HDBaseT input ports on the corresponding HDBaseT receivers using CAT6/6a/7 cables.
4. Connect the IR receiver cable to the IR IN port on the transmitter.
5. Connect the IR blaster cable to the IR OUT port on the HDBaseT receivers.
6. Connect the audio output ports (coaxial and L/R) on the transmitter to an amplifier or speaker.
7. Connect the power adapter to the DC 24V port on the transmitter and plug it into an AC outlet.
8. Connect the power adapter to the DC 24V port on the HDBaseT receivers and plug it into an AC outlet.
Please refer to the user manual for more detailed instructions and diagrams.
Add New Comment