User Manual Q&AAnswer
Mar 03, 2025 - 07:11 PM
To switch between the two HDMI input devices, you can use either the front panel buttons, hot-key combinations on your keyboard, or mouse operations. Here's how you can do it:
1. Front Panel Buttons:
- Press the "Signal source selection button" on the front panel.
- The corresponding PC 1/2 LED will light up to indicate the selected input source.
2. Hot-key Combinations on Keyboard:
- Use the following hot-key combinations on your keyboard:
- Scroll Lock + Scroll Lock + 1/2: Switch to the corresponding input port.
- Ctrl + Ctrl + 1/2: Switch to the corresponding input port.
- You can use either of the two hot-key methods mentioned above.
3. Mouse Operations:
- Slide the mouse beyond the upper and left interface of the screen to select the last input port.
- Slide the mouse beyond the bottom and the proper interface of the screen to determine the next input port.
- Note: The mouse operation function is turned off by default. Pressing "*+s" on the keyboard can turn on edge detection (mouse sliding switch function). Pressing "*+1/2/3/4" can turn off edge detection.
Please refer to the user manual for more detailed instructions and additional functions of the VigilLink VLKV-HD21 HDMI 2x1 KVM Switcher.
Add New Comment