User Manual Q&AAnswer
Mar 03, 2025 - 03:05 AM
To connect the VigilLink VLEX-HT2150-TR 18Gbps HDBaseT Extender 150m to your devices, follow these steps:
1. Connect the HDMI source (such as a Blu-ray player or gaming console) to the HDMI IN port on the transmitter unit using an HDMI cable.
2. Connect the HDMI display (such as a TV or projector) to the HDMI OUT port on the transmitter unit using an HDMI cable.
3. Connect the HDBT OUT port on the transmitter unit to the HDBT IN port on the receiver unit using a Cat5e/6 cable.
4. Connect the HDMI display to the HDMI OUT port on the receiver unit using an HDMI cable.
5. Connect the audio output device (such as speakers or a soundbar) to the AUDIO OUT port on the receiver unit using a 3.5mm stereo cable.
6. Connect the IR remote control receiver to the IR IN port on either the transmitter or receiver unit using the provided IR Receiver cable.
7. Connect the IR blaster to the IR OUT port on either the transmitter or receiver unit using the provided IR Blaster cable.
8. Connect the power adapter to the DC 24V port on either the transmitter or receiver unit and plug it into a power outlet.
Once all the connections are made, the extender should be ready to use. Make sure to refer to the user manual for any additional setup or configuration instructions.
Add New Comment