Answer

Mar 03, 2025 - 03:01 AM
To switch between different HDMI sources using the VigilLink VLSW-41H20ER HDMI switch, you have two options: manual switching and auto-switching.
1. Manual Switching:
- Press and hold the "AUTO/INPUT" button on the front panel for 2 seconds to switch to manual switching mode. The "AUTO LED" will turn off.
- Tap the "AUTO/INPUT" button 1/2/3/4 times to select the input source for the corresponding INPUT 1/2/3/4 port.
- The corresponding "IN 1/2/3/4 LED" will turn on to indicate the selected input source.
2. Auto-Switching:
- Press and hold the "AUTO/INPUT" button on the front panel for 2 seconds to switch to auto-switching mode. The "AUTO LED" will turn on.
- In auto-switching mode, the device will automatically detect the active input source. The output port will output the signal from the last connected input source.
Note: The VigilLink VLSW-41H20ER HDMI switch supports up to four HDMI input sources and one HDMI output display. Make sure to connect your HDMI devices to the appropriate input ports on the rear panel of the switch.
For more detailed instructions and information, please refer to the user manual provided with the product.
Add New Comment