User Manual Q&AAnswer
Mar 03, 2025 - 02:58 AM
To switch between different input sources using the VigilLink VLSW-41H20R HDMI Switch, you have two options: auto-switching mode and manual switching mode.
1. Auto-switching mode: In this mode, the switcher will automatically detect and switch to the active input source. To enable auto-switching mode, press and hold the "Auto or manual select" button on the front panel of the switcher for more than 2 seconds. The EDID status LED will indicate that auto-switching mode is active. The switcher will automatically switch to the input source that is currently active.
2. Manual switching mode: In this mode, you can manually select the input source using the front panel buttons or the included IR remote. To switch to a specific input source, simply press the corresponding "In1/In2/In3/In4" button on the front panel or the IR remote. The input indicator LED on the front panel will illuminate to indicate the selected input source.
Please note that if you are using the auto-switching mode, make sure that only one input source is active at a time. If multiple input sources are active, the switcher may not function correctly.
For more detailed instructions and information, please refer to the "Switcher Operation controls and Functions" section in the VigilLink VLSW-41H20R user manual.
Add New Comment