Answer

Mar 03, 2025 - 02:39 AM
To install the flexible venting kit for the Simpson 39P361E-02 Tumble Dryer, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Start by locating the flexible venting kit, which consists of an adaptor, flexible duct assembly, screws, and instructions. The part number for the kit is 0015 040 000.
2. Ensure that you have all the components mentioned in the kit.
3. Position the dryer near the desired venting location, ensuring that there is enough space for the flexible duct to connect to the vent.
4. Remove the existing vent cover or cap from the vent opening.
5. Attach the adaptor to the vent opening by aligning it properly and securing it with the provided screws. Use a screwdriver to tighten the screws.
6. Connect one end of the flexible duct assembly to the adaptor. Ensure a secure connection by pushing the duct onto the adaptor until it fits snugly.
7. Route the other end of the flexible duct to the dryer's exhaust outlet. Make sure there are no kinks or bends in the duct that could restrict airflow.
8. Attach the other end of the flexible duct to the dryer's exhaust outlet, ensuring a secure connection.
9. Use the provided screws to fasten the duct to the dryer's exhaust outlet. Tighten the screws using a screwdriver.
10. Once the flexible venting kit is properly installed, you can test the dryer by running a cycle to ensure that the air is being properly vented outside.
Note: It is important to follow the instructions provided in the manual for the specific model of your Simpson tumble dryer, as there may be slight variations in the installation process.
Add New Comment