User Manual Q&AAnswer
Mar 03, 2025 - 02:35 AM
To install the EMOS ZC0110, ZC0111 LED Orientation Luminaire, follow these steps:
1. Inspect the luminaire before use. If any part is damaged, do not use the product.
2. Make sure the power supply is disconnected before assembly.
3. The luminaire is designed to be installed onto a solid base in indoor or outdoor areas. It has an IP65 enclosure rating, which means it is suitable for outdoor environments.
4. The installation box must be firmly fixed in the wall or base to prevent damage.
5. Attach the luminaire securely to a fixed base in the wall.
6. Connect the power cable to a 230 V~ power network. However, do not connect the conductor to the power supply during installation.
7. The luminaire is only suited for fixed installation.
8. It can only be connected to an electrical network with installation and protection in line with valid regulations and standards.
9. Before interfering with the luminaire or performing maintenance and repair, it must be disconnected from the power network by a qualified person.
10. Protection against dangerous contact voltage is ensured through earthing.
11. If any portion of the luminaire becomes damaged, immediately take it out of operation.
12. The LEDs inside the luminaire are not replaceable.
13. Do not interfere with the internal wiring of the luminaire.
14. Never cover the luminaire with materials for thermal insulation.
15. If the luminaire cover becomes damaged, do not use the luminaire and immediately replace the cover with a new one.
Please refer to the user guide for more detailed instructions and safety precautions.
Add New Comment