User Manual Q&AAnswer
Mar 03, 2025 - 01:50 AM
Cleaning the SINTERIT-PHS Powder Handling Station is an important maintenance task to ensure its optimal performance. Here is a step-by-step guide on how to clean the station:
1. Power off the station and unplug it from the power source.
2. Remove any remaining powder from the powder container and sieving module. Use a brush or vacuum cleaner to carefully remove the powder.
3. Clean the sieving module by removing it from the station and rinsing it with water. Make sure to dry it thoroughly before reattaching it.
4. Wipe down the exterior surfaces of the station using a soft cloth and mild detergent solution. Avoid using abrasive cleaners or solvents that may damage the station.
5. Clean the drawers and shelf using a damp cloth. You can also use the built-in LED lighting to ensure thorough cleaning.
6. Check the HEPA filter and clean or replace it if necessary. Refer to the user manual for instructions on accessing and maintaining the filter.
7. Inspect the vacuum attachments for any clogs or debris. Clean them as needed to ensure proper suction.
8. Once all the components are clean and dry, reassemble the station and plug it back into the power source.
It is important to follow proper safety precautions and refer to the user manual for detailed instructions on cleaning and maintenance. Regular cleaning of the SINTERIT-PHS Powder Handling Station will help prolong its lifespan and maintain its efficiency.
Add New Comment