User Manual Q&AAnswer
Mar 03, 2025 - 01:45 AM
To connect the LED to the fountain, please follow these steps:
1. Connect LED to hose: Attach the LED to a hose using the provided connection. Make sure it is securely attached.
2. Connect a hose to the top part of the fountain: Through the opening on the top part of the fountain, connect a hose to it. Ensure a tight connection to prevent any leaks.
3. Connect a hose to the pump: Attach another hose to the pump, which is located inside the fountain. This hose will be responsible for circulating the water.
4. Connect the LED to a short connection from the pump: Connect the LED hose to a short connection coming from the pump. This will allow the LED to receive power from the pump.
5. Flow adjustable by pump: Adjust the flow of water using the pump. You can increase or decrease the water flow as desired.
6. Connect the end of the pump connected to the adapter: Connect the end of the pump, which is connected to the adapter, to a power source. Ensure that the adapter is compatible with your local power outlets.
7. Completely submerge the pump in water: Submerge the pump completely in water to ensure proper functioning. Make sure the water level is sufficient to cover the pump.
Please refer to the assembly instructions in the manual for visual guidance on these steps.
Add New Comment