User Manual Q&AAnswer
Mar 03, 2025 - 01:26 AM
To install the Austere 5S-RCA1-2.0M Audio Cable Series, follow these steps:
1. Make sure all your devices are powered off before installation.
2. For Audio Interconnect Cables:
- Each end of the interconnect cables is color-coded. White is for the left channel (L), and red is for the right channel (R).
- Plug one end of the audio cable into the source device, matching the colors for right and left.
- Install the opposing ends directly into the corresponding audio output of your television or receiver, again matching the colors for right and left.
3. For Optical Audio Cables:
- Remove the protective cap from each end of the optical cable.
- Plug one end of the optical cable into the connected device (soundbar), ensuring the orientation of the cable matches the orientation of the optical connector on your device.
- Install the opposing end directly into the back of your television or receiver.
4. For Subwoofer Cables:
- Plug one end of the subwoofer cable into the connected device (soundbar or subwoofer).
- Install the opposing end directly into the corresponding audio output of your television or receiver.
If you have any installation questions or need further assistance, you can contact Austere's technical support team through phone or email:
- Phone: 1-855-672-0684
- Email: support@austere.com
Please refer to the Austere 5S-RCA1-2.0M Audio Cable Series User Guide for more detailed instructions and precautions.
Add New Comment