User Manual Q&AAnswer
Mar 03, 2025 - 12:09 AM
To change the temperature set point on the CLAGE DTK Digital Temperature Control, follow these steps:
1. Press the SET button (1) once to enter the setting screen and view the current set point.
2. Use the arrow keys to adjust the desired set point temperature.
3. Press the SET button (1) again to confirm the new set point and return to the normal screen.
For example, if the set temperature is changed to 35 °C, the fan will switch ON at 36 °C and OFF at 35 °C.
Note: It is not recommended to lower the set point below the factory setting of 30 °C, as this could result in the fan not turning OFF.
Add New Comment