Answer

Mar 02, 2025 - 11:50 PM
To pair the KL08RF wiring centre with your wireless thermostats, follow these steps:
1. Make sure the wiring centre is connected to the power supply (230 V AC).
2. Press and hold the Pair button on the wiring centre for a few seconds until the Network Status LED starts blinking.
3. On your wireless thermostat, go to the pairing or setup menu.
4. Follow the instructions on your thermostat to search for available devices.
5. When prompted, select the KL08RF wiring centre from the list of available devices.
6. The thermostat will establish a connection with the wiring centre, and the Network Status LED will turn solid green, indicating a successful pairing.
Note: If you have multiple KL08RF wiring centres, you can use the Pair button to check the address of each wiring centre in the ZigBee network. The number of LEDs at the zones will indicate the address of the wiring centre.
For more detailed instructions and troubleshooting information, please refer to the user manual provided with the SALUS KL08RF ZigBee Network Wireless Wiring Centre.
Add New Comment