How do I mount and tilt the Anolis Eminere Side 1 LED Light? (Anolis Eminere Side 1 LED Light Instruction Manual)

Answer

manuals.plus

Mar 02, 2025 - 11:49 PM

To mount and tilt the Anolis Eminere Side 1 LED Light, follow these steps:

1. Mounting and Tilting - Standard Brackets:
- Drill two mounting holes into a flat, non-flammable surface according to the spacing and size of the brackets.
- Loosen the M6x8 locking screws on both sides of the fixture.
- Adjust the fixture to the desired position and fasten it to the mounting surface using the pre-drilled holes.
- Tilt the luminaire to the desired angle and tighten the locking screws on both sides.

2. Installation of Wall Mount Brackets:
- Unscrew the four M5x12 screws from the original mounting brackets and remove the brackets.
- Fasten L-shape brackets into the xxxx holes of the original mounting brackets on both sides using four M5x12 screws.
- Fasten the original mounting brackets and wall mount extension parts together using four M5x12 screws.
- Fasten the wall mount brackets and L-shape brackets on the fixture using four M5x12 screws.
- The fixture can be mounted in any orientation on a flat, non-flammable surface. It can also be tilted for easier access to mounting holes.

3. Connection:
- Follow the provided instructions for connecting the cable and panel connectors.
- Align the arrow symbols on both connectors and push the cable connector straight into the panel connector without twisting the bayonet lock.
- A correct connection should be signaled by a silent "click" sound.
- To disconnect, rotate the bayonet lock counter-clockwise by 30° and pull out the cable connector smoothly.

Please note that these instructions are a summary and it is important to refer to the Anolis Eminere Side 1 LED Light Instruction Manual for complete and accurate information.