How do I set the power limit parameters for the GOODWE GM3000 Power Limit Solution for Grid-Tied PV Inverters? (GOODWE GM3000 Power Limit Solution PV Inverters User Manual)

Answer

manuals.plus

Mar 02, 2025 - 11:44 PM

To set the power limit parameters for the GOODWE GM3000 Power Limit Solution, you can follow the instructions provided in the user manual. There are three different methods to set the parameters: via the LCD on the inverter, via the SolarGo App, or via the ProMate software.

1. Setting Power Limit Parameters via LCD:
- Ensure that your inverter is non-MT Series and non-SMT Series, has an LCD, and is wired and powered on.
- Stop pressing the button for a period on any page to go back to the initial page.
- Short press the button to switch menu or adjust parameter values.
- After adjusting the parameter values, long press the button to set the parameters successfully.

2. Setting Power Limit Parameters via SolarGo App:
- Ensure that your inverter is wired and powered on, and connected to WiFi, LAN, 4G, GPRS, Bluetooth, or Wi-Fi/LAN module.
- Download and log into the SolarGo App.
- Tap on Home > More > Advanced Setting > Power Limit Settings to enter the parameter setting page.
- Enter the parameters based on your actual needs and tap "√" to set the parameters successfully.

3. Setting Power Limit Parameters via ProMate:
- Ensure that you have obtained ProMate from the website and installed it on your computer.
- Ensure that your inverter is wired and powered on, and that no faults have occurred.
- Connect the EzLogger Pro or SEC1000 in the system.
- Follow the specific instructions provided in the user manual for setting the power limit parameters using the ProMate software.

Please note that the specific steps and parameters may vary depending on the model and firmware version of your inverter. It is important to refer to the user manual for your specific inverter model for accurate and detailed instructions.