User Manual Q&AAnswer
Mar 02, 2025 - 11:38 PM
To square the tent footprint layout for the ANCHOR Navi-Trac Frame Tent 40 Wide Hip End System, follow these steps:
1. Use a tape measure to mark the ends of a line for one end equal to the exact width of the unit.
2. Hold the "0" end of one tape at point "A" and the "0" end of another tape at point "B".
3. Extend the first tape along one side of the unit to a measurement equal to the exact length of the tent.
4. Consult the chart provided in the manual to find the diagonal for the tent you are building.
5. Extend the second tape to a measurement exactly equal to this diagonal.
6. Bring the two tapes together so that the length measurement of one lies directly on the diagonal measurement of the other. Pull the tapes tight and mark their intersection. This will locate a far corner (point "C").
7. Switch tapes so that tape 1 measures the diagonal and tape 2 measures the length. This will locate point "D".
8. With the four primary corners located, lay out baseplates and uprights according to the diagram provided in the manual and begin assembly, double-checking from time to time to make sure the square footprint is being maintained.
Please refer to the manual for visual diagrams and additional information on squaring the tent footprint layout.
Add New Comment