User Manual Q&AAnswer
Mar 02, 2025 - 09:09 PM
To adjust the detection range of the sensor, you can use the remote control HRC-11 or the rotary switch built inside the sensor. Here are the steps to adjust the detection range using the remote control:
1. Press the "Shift" button on the remote control. The LED on the top left corner will turn on for indication.
2. Press the button in zone 8 (labeled "Detection range") to select the desired detection range. You can choose from 100%, 75%, 50%, or 10%.
3. After selecting the desired detection range, press the "Apply" button to set the new detection range to the sensor unit(s).
Alternatively, you can adjust the detection range using the rotary switch inside the sensor. Please refer to the manual for the specific settings and steps for adjusting the detection range using the rotary switch.
Note: The detection range determines the area within which the sensor can detect motion and trigger the light. Adjusting the detection range allows you to customize the sensor's sensitivity to motion.
Add New Comment