User Manual Q&AAnswer
Mar 02, 2025 - 08:45 PM
To connect the BLUE AURA WS10i Wireless Stereo Speakers to your source devices, follow these steps:
1. Place the speaker in your preferred position within reach of a wall socket.
2. Connect the AC lead to the speaker using the supplied mains leads and power supply.
3. Turn on the mains socket.
4. Your WS10i comes with two cables for connection to your source devices:
- For devices with a 3.5mm headphone out socket (e.g., MP3 player), use the 3.5mm to 3.5mm cable. Connect one end to your device's headphone out and the other end to the Line In on the rear of the WS10i loudspeaker.
- For devices with RCA sockets (e.g., CD player), use the 3.5mm to RCA cable. Connect the 3.5mm jack to Line In on the rear of the loudspeaker and the RCA (red/white) plugs to the source device.
5. Once a connection is made to Line In, you can play music through the WS10i.
Note: If you are using the optional WST transmitter for wireless mode, make sure Line In on the rear of the loudspeaker is not connected. Follow the instructions provided in the manual for using the transmitter.
For more detailed instructions and troubleshooting, please refer to the BLUE AURA WS10i Wireless Stereo Speakers User Guide.
Add New Comment