User Manual Q&AAnswer
Mar 02, 2025 - 08:33 PM
To clean and maintain the CLOVIS 21S0103-67 Acrylic Flatbottom Soaking Bathtub, follow these guidelines:
1. Cleaning: Use a general liquid detergent and a soft cloth to clean the bathtub. Avoid using detergents that contain acetone or ammonia water element, as they can damage the acrylic surface. When disinfecting the bathtub, use a disinfectant without formaldehyde.
2. Surface Stains: If there are surface stains, you can rub them with toothpaste on a soft cloth. This gentle abrasive action should help remove the stains.
3. Mild Abrasions or Burns: For mild abrasions or burns on the surface, you can use wet No.2000 waterproof abrasive paper to polish the affected area. Afterward, buff the ground where it was polished to restore the finish.
4. Electroplating Parts: Use a soft cloth to wipe any dirt on the electroplating parts of the bathtub. Avoid using coarse cloth or thinner, as they may damage the electroplated finish.
5. Avoid Sharp Objects: It is strictly forbidden to strike the bathtub with sharp, hard objects. This can cause damage to the acrylic surface.
By following these cleaning and maintenance instructions, you can keep your CLOVIS 21S0103-67 Acrylic Flatbottom Soaking Bathtub in good condition and prolong its lifespan.
Add New Comment