User Manual Q&AAnswer
Mar 02, 2025 - 07:57 PM
To install the Orbegozo PHF 45 Electric Patio Heater, follow these steps:
1. Ensure that the wall or ceiling where you plan to install the heater is solid and free from water pipes or electric wires.
2. Place the heater 40cm away from side walls and the ceiling.
3. Mark the desired location for the heater using a pencil.
4. Check if the marks are level before drilling the holes.
5. Use a power drill and appropriate drill bits to make the holes.
6. Insert long screws with fixing studs into the holes.
7. Place the wall support on the screws and secure them with nuts.
8. Attach the other wall support to the heater using short screws.
9. Align both supports and secure them with screws and nuts.
10. Set the desired angle of tilt for the heater.
Important: Make sure that the power cord does not come into contact with the housing or grill of the heater when it is working to prevent melting or burning. You can fix the power cord to the wall support using plastic flanges.
The heater must be installed at least 1.8m above the floor and always in a horizontal position.
For a visual guide, refer to the instruction manual provided by Orbegozo at www.orbegozo.com.
Please note that it is recommended to consult a professional if you are unsure about the installation process or if you need assistance.
Add New Comment