User Manual Q&AAnswer
Mar 02, 2025 - 07:53 PM
To connect the SmartLife Smart Life jz App to the Smart Camera, please follow these steps:
1. Make sure your Wi-Fi is available and connected to the internet.
2. Connect the camera to the power source and wait for the system startup to complete.
3. Open the "Smart Life" App on your Android or iOS device.
4. On the main screen of the app, tap the "+" icon in the upper right corner.
5. Choose "Security & Sensor" and then tap on "Smart Camera" to add the camera.
6. Follow the on-screen prompts and tap "Next step".
7. If your mobile phone is not connected to Wi-Fi, tap on "Connect to Wi-Fi" and connect to your Wi-Fi network.
8. If your phone is already connected to Wi-Fi, a QR code will appear on the screen. Scan the QR code using the Smart Camera (keep the camera about 20-30 cm away from your phone's lens).
9. After scanning the QR code, tap on "Hear the prompt sound" and wait for the connection process to complete.
10. Once the connection is completed, tap on "Finish".
11. You will then be taken to the preview interface where you can see the live feed from the camera.
12. After closing the preview interface, you can find the connected device on the app's home page. Simply tap on the device to view the monitoring situation without needing to re-add it.
Please note that only a 2.4 GHz Wi-Fi network is supported for the connection.
Add New Comment