User Manual Q&AAnswer
Mar 02, 2025 - 07:39 PM
To connect the AJAX HUB Wireless Security Control Panel to the mobile application, follow these steps:
1. Install the mobile application on your smartphone or tablet. You can find the application on your device's app store.
2. Create an Ajax account within the mobile application.
3. Connect the power cables and Ethernet cable to the corresponding sockets on the HUB. Make sure to install a SIM card from a mobile operator without a PIN code request.
4. Press and hold the On/Off button on the HUB for 2 seconds to switch it on.
5. Wait for a minute. The logo on the HUB will change color to white (indicating a connection to the server via Ethernet and GSM) or green (indicating only one communication channel is active).
6. Open the mobile application and log in to your Ajax account.
7. Follow the prompt messages in the mobile application to add the HUB to your device list. The HUB will update the system information within a minute.
8. Once the HUB is added, you can customize the settings, including notifications for each user, such as push notifications, SMS messages, and telephone calls.
9. If you need to adjust the parameters of the Ethernet and GSM connections or the Jeweller protocol, you can do so in the HUB settings.
For more detailed instructions and information, please refer to the User Manual available on the Ajax Systems website: ajax.systems/support/hubs.
Add New Comment