User Manual Q&AAnswer
Mar 02, 2025 - 07:29 PM
To change the color temperature of the eurotech lighting LUD2300 Apical Wall Lights, follow these steps:
1. Make sure the power is turned off before proceeding with any installation or adjustment.
2. Unscrew the Phillips screws on the side of the fitting to remove the front cover.
3. Remove the LED lens by unscrewing the 4 screws.
4. Locate the switch at the back of the fitting.
5. Use the switch to change the color temperature according to your preference.
- Blue = Negative
- Brown = Positive
6. Once you have selected the desired color temperature, reassemble the fitting by following the reverse steps:
- Line up the fixing holes of the fitting with the pre-drilled fixing holes on your mounting surface.
- Fix the fitting with the provided screws.
- Fit the LED lens back onto the fitting, ensuring that xxxx seals are used and a tight seal is made.
Please note that these instructions are general guidelines and may vary slightly depending on the specific model and version of the eurotech lighting LUD2300 Apical Wall Lights. Always refer to the instruction manual provided by the manufacturer for detailed and accurate information.
For further specifications and information, you can visit the eurotechlighting.co.nz website.
Add New Comment