User Manual Q&AAnswer
Mar 02, 2025 - 07:26 PM
To adjust the range and hold time of the motion sensor on the hidealite Liteline IP65 1500 DALI, you need to set the DIP switches on the luminaire. Here is how you can do it:
1. Range: The range is the area the sensor covers. The units lights up when motion is sensed in the area. To adjust the sensor's range, set the DIP switch as follows:
- DIP switch 1: ON for a range of 10m x 6m (ceiling installation) or 150° (wall installation).
- DIP switch 1: OFF for a range of 360° (ceiling installation) or 150° (wall installation).
2. Hold Time: The hold time refers to the time the unit remains lit after the person leaves the sensor's range. To adjust the hold time, set the DIP switch as follows:
- DIP switch 2: ON for a hold time of 5 seconds.
- DIP switch 2: OFF for a hold time of 90 seconds.
- DIP switch 3: ON for a hold time of 5 minutes.
- DIP switch 3: OFF for a hold time of 15 minutes.
Please note that these settings may vary depending on your specific model of the hidealite Liteline IP65 1500 DALI. It is always recommended to refer to the product manual for accurate instructions and settings.
Add New Comment