User Manual Q&AAnswer
Mar 02, 2025 - 11:01 AM
According to the instruction manual, proper maintenance and cleaning of the SEALEY SA630.V3 Air Mini Ratchet Wrench Premier are essential for its longevity and performance. Here is a step-by-step guide on how to maintain and clean the wrench:
1. Lubrication: Daily lubrication is recommended to prolong the life of the wrench. Use a few drops of Sealey air tool oil and drip it into the air inlet of the wrench.
2. Cleaning: After each use, clean the wrench thoroughly. Do not use worn or damaged sockets. If your model has an air strainer (located in the area of the air inlet), remove the strainer and clean it. Flush the wrench out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin. Allow it to dry before use.
3. Damaged Parts: If any parts of the wrench are damaged or worn, they should be replaced immediately. Use genuine parts only, as non-authorized parts may be dangerous and will invalidate the warranty.
4. Air Supply: Before changing accessories, servicing, or performing maintenance, always disconnect the wrench from the air supply. Ensure the air supply is clean and does not exceed 90psi while operating the wrench. Excessive air pressure and unclean air can cause damage and personal injury.
5. Storage: When the wrench is not in use, disconnect it from the air supply and store it in a safe, dry, and childproof location.
It is important to follow these maintenance and cleaning instructions to ensure the proper functioning and longevity of the SEALEY SA630.V3 Air Mini Ratchet Wrench Premier.
Add New Comment