User Manual Q&AAnswer
Mar 02, 2025 - 10:46 AM
Installing the TopAction TM100 Magnetless Cadence Sensor is easy and tool-free. Here are the steps to install it:
1. Choose the desired location on your bike's frame or crank arm to attach the sensor. Make sure it is within the recommended distance from the magnet target (usually 1-5mm).
2. Clean the chosen area thoroughly to ensure proper adhesion.
3. Peel off the adhesive backing from the sensor and firmly press it onto the cleaned surface. Make sure it is securely attached.
4. If you want to use the sensor in speed mode, reinstall the battery by opening the sensor and inserting a CR2032 battery. The blue light will flash to indicate the speed mode.
5. If you prefer to use the sensor in cadence mode, reinstall the battery as mentioned in step 4. This time, the green light will flash to indicate the cadence mode.
Note: The TopAction TM100 Magnetless Cadence Sensor is compatible with Bluetooth 4.0 and ANT+ devices, including iOS and Android apps, bicycle computers, and sport watches.
For more detailed instructions and troubleshooting information, please refer to the user manual provided with the product.
Add New Comment