User Manual Q&AAnswer
Mar 02, 2025 - 10:42 AM
To install the Enoki 52 Inch Smart Ceiling Fan, follow these steps:
1. Turn off the electrical power at the main fuse or circuit breaker.
2. Attach the mounting bracket to the outlet box using the screws and washers provided.
3. Remove the downrod clip and downrod pin from the downrod. Loosen the two set screws at the top of the yoke.
4. Insert the downrod through the canopy, canopy cover, and yoke cover. Feed the wires and braided cable from the fan through the downrod.
5. Insert the downrod into the yoke and reinstall the downrod pin and downrod clip. Retighten the two set screws.
6. Install the ball end of the downrod into the opening in the mounting bracket, ensuring the tab in the mounting bracket is seated in the slot in the downrod ball.
7. Place the receiver in the mounting bracket with the flat side up.
8. For installation in Canada, feed the loop of the braided cable through the outlet box and secure it around the secondary support xxxx .
9. Use wire connectors to connect the fan and receiver wires to the supply wires from the outlet box according to the wiring diagram.
10. Replace the canopy and canopy cover, securing them with the screws.
11. Attach the blades to the motor assembly using the blade screws and washers.
12. Install the fitter plate and light kit, connecting the wires as instructed.
13. Attach the glass bowl to the light kit.
14. Install the batteries in the remote control and sync it with the fan.
15. Turn on the electrical power at the main fuse or circuit breaker and the wall switch.
Please refer to the Enoki 52 Inch Smart Ceiling Fan Owner's Manual for more detailed instructions and safety precautions.
Add New Comment