User Manual Q&AAnswer
Mar 02, 2025 - 10:36 AM
To connect the LINDY 42701 50m Hybrid USB 3.0 Cable, follow these steps:
1. Connect the USB Type A plug of the cable to your computer's USB port.
2. Connect your USB device to the USB Type A female port of the Hybrid Cable.
3. If necessary, connect the USB A to Micro-B power cable to provide power to the cable.
Make sure to follow the correct orientation when plugging in the connectors. The USB Type A plug goes into the computer's USB port, and the USB device connects to the USB Type A female port of the cable. If additional power is required, use the USB A to Micro-B power cable to provide power to the cable.
Please note that the minimum bending radius of this cable is 50mm. Do not bend the cable to a smaller radius, as it may damage the internal fiber cable. Also, avoid stepping on the cable or putting heavy pressure on it to prevent any damage.
For further information and instructions, please refer to the LINDY 42701 50m Hybrid USB 3.0 Cable User Manual provided with the product.
Add New Comment