User Manual Q&AAnswer
Mar 02, 2025 - 10:02 AM
To pair a new remote controller with the RF Wireless Remote Advanced Light Strip, please follow these steps:
1. Unplug the power of the main unit and wait for 5 seconds.
2. Press the 'SPEED' and 'SPEED+' keys together within 5 seconds after powering on the main unit. This operation will allow the main unit to recognize the new remote controller.
3. Once the pairing is successful, the new remote controller will be paired with the main unit.
Note: By default, the remote and main unit are 1 to 1 paired. However, the main unit can be paired with up to 3 remote controllers, and each remote controller can be paired with any main unit.
If you need to enter the free remote pairing mode, please follow these steps:
1. Unplug the power of the main unit and wait for 5 seconds.
2. Plug in the power of the main unit.
3. Press the 'ON/OFF' and 'MODE+' keys together within 5 seconds after powering on the main unit.
4. After this operation, the main unit will recognize any remote controller. To pair the main unit back to a specific remote, repeat the "Pairing New Remote" operation.
Please refer to the product manual for more detailed instructions and illustrations.
Add New Comment