Answer

Mar 02, 2025 - 09:37 AM
To install the anti-tip bracket for the Whirlpool WEE515S0LB range, follow these steps:
1. Remove the anti-tip bracket from inside the oven.
2. Determine whether you will be using the floor or wall mounting method. If you have a stone or masonry floor, you can use the wall mounting method. If you are installing the range in a mobile home, you must secure the range to the floor.
3. Determine and mark the centerline of the cutout space. The mounting can be installed on either the left or right side of the cutout. Position the mounting bracket against the wall in the cutout so that the V-notch of the bracket is 12 1/2" from the centerline.
4. Drill two 1/8" holes that correspond to the bracket holes of the determined mounting method.
5. Using the two #10 x 1 5/8" Phillips-head screws provided, mount the anti-tip bracket to the wall or floor.
6. Move the range close enough to the opening to allow for final electrical connections. Remove the shipping base, cardboard, or hardboard from under the range.
7. Move the range into its final location, making sure the rear leveling leg slides into the anti-tip bracket.
8. Move the range forward onto the shipping base, cardboard, or hardboard to continue installing the range.
It is important to install the anti-tip bracket properly to prevent tipping of the range, which can be dangerous. Make sure to follow the instructions provided in the owner's manual for the specific model of the range.
Add New Comment