User Manual Q&AAnswer
Mar 02, 2025 - 09:20 AM
To start the TRADGARDSTEKNIK GX200 Evacuation Equipment, follow these steps:
1. Preparation: Ensure that the fuel tank is filled with unleaded petrol (no oil) and the auxiliary tank is filled with a petrol-diesel mixture (2% diesel for every 10 liters of petrol).
2. Re-fuelling: Only re-fuel the equipment outdoors and avoid smoking while re-fuelling. Use a funnel to top up the fuel levels. Do not fill the fuel tank to the brim, leave some space for fuel expansion.
3. Starting the engine: Set the throttle control to the "Start" position. Start the engine using the recoil starter. Once the engine starts turning over, open the choke and allow the engine to warm up for approximately 3 minutes. During this time, close the fuel tap to the auxiliary tank to inhibit the development of gas. Open the petrol tap to the auxiliary tank to enable the fumes to develop.
4. Switching off the engine: Close the fuel tap to the auxiliary tank and wait for 1 minute. Set the throttle control to the idling mixture position. Set the On/Off switch to the "Off" position. Finally, close the fuel tap.
Please refer to the TRADGARDSTEKNIK GX200 Evacuation Equipment User Manual for more detailed instructions and safety precautions.
Add New Comment