User Manual Q&AAnswer
Mar 02, 2025 - 09:12 AM
To install the Loewe S.77 Floor Stand Motor, follow these steps:
1. Lay a protective pad on delicate surfaces to prevent scratching.
2. Lay out Strut A in the correct orientation, ensuring that the recess (groove) matches the illustrated form.
3. Repeat step 2 for Struts B and C.
4. Push the countersunk xxxx (E) through the hole in the support tube and tighten it using a spanner with a size of SW5. The tightening torque should be approximately 5 Nm.
5. Stick the protective felt (F) centrally as shown in the instructions.
6. Position the Loewe S.77 Floor Stand Motor at the desired installation site.
7. With the help of a third person, accurately position the TV on the mounting plate of the Loewe S.77 Floor Stand Motor.
8. Protect the upper part of the Loewe S.77 Floor Stand Motor by covering it with a fleece from the packaging material.
9. Mount the TV on the mounting plate by two people, ensuring that the lugs (N1 and N2) of the TV are fitted and lug (N3) locks into place. Slightly lift and push the TV onto the Loewe S.77 Floor Stand Motor.
10. xxxx the flange head screws (G) all the way in using a Torx screwdriver T20, but do not tighten them.
11. Carefully remove the backup tapes, four protection strips (A), stabilisation plate, and protective fabric covers.
12. Align the TV horizontally using a level.
13. Tighten the flange head screws (G) by hand.
14. Unscrew and remove the retaining xxxx for transport using a Torx screwdriver T20.
15. Lay out the connecting cable, ensuring it is routed through the Loewe S.77 Floor Stand Motor as illustrated.
16. Connect the cable to the TV according to the provided sketch and the TV's instruction manual.
17. Lay and connect the Loewe S.77 Floor Stand Motor control line (L) as shown, ensuring the cables are kept loose and not stretched.
18. Fix the cable with the included Velcro cable tie (H) as illustrated. Use the second Velcro cable tie if necessary for additional fixation.
Please note that these instructions are a summary and it is important to refer to the full instruction manual for complete and accurate installation guidance.
Add New Comment