Answer

Mar 02, 2025 - 09:08 AM
To program the elero Combio-868 HE Built In Radio Receiver for Heating Systems, follow these steps:
1. Ensure that the device is well-ventilated and not near any highly inflammable materials.
2. Switch off the mains power.
3. The device will enter programming mode for 5 minutes.
4. Briefly press the programming button (P).
5. The heating system will alternate between 100% and 50% output for 2 minutes.
6. Press the ▲ button immediately when 100% heat output appears.
7. The heating will go off for a short time.
8. Press the ▼ button immediately when 50% heat output appears.
9. The heating will go off, and the transmitter is now programmed.
Note: You can program up to 16 transmitters. To program additional transmitters, repeat steps 4-9.
Please refer to the elero Combio-868 HE Built In Radio Receiver for Heating Systems instruction manual for more detailed information and troubleshooting tips.
Add New Comment